Welcome to POLYMiX The Market Leader of Pre-mixed

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

POLYBOND™ Standard 158

back

POLYBOND™ Standard 158

Product Group:

Advantages

Recommended Substrate

not Recommended

POLYBOND Standard 158 is not recommended for use onto wood, metal, plastic, cement asbestos board or painted surfaces.

Application method and thickness

POLYBOND Standard 158 is highly suitable to be used for both internal and external application with recommended average bedding thickness of 5 to 8mm, using either the Single Bonding Method of notched troweling onto substrate alone or the Double Bonding Method 1 of Wet on Wet application.

  • Install the tiles immediately and progressively onto the freshly notched trowel bed and to continuously ensure good contact between the tiles and substrate by pressing the tiles firmly with a slight twisting action. Tiles must be fully bedded with POLYBOND” Standard 158 to ensure voids free beneath the tiles. Gently tap the tiles to the finish level and position for maximum contact with the adhesive.
  • Re-trowel over the area of the adhesive to break the skin if skinning (a shinny and glossy appearance) has started to form prior to tiling.
  • Any adjustment of tiles shall be done within 10-15 minutes after installation of POLYBOND™ Standard 158. Any tile adjustment beyond this time shall require the removal of the existing adhesive and the substrate shall be applied with a fresh coat of adhesive.
  • For each application, do not apply POLYBOND™ Standard 158 beyond a working area that cannot be completed within 10-15 minutes. Remove surplus adhesive from the tile surface and joints with a damp cloth. Avoid installation of the tile grout and any heavy loading of newly installed tile surface within 24 hours.
  • It is recommended to leave a minimum of 3mm at tile joints in between all tiles for ease of grouting and expansion/contraction purpose.
Packing: 25kg/bag
Shelf Life: 6 months in original packing
Storage: Keep in cool and dry condition
  • Precautions!