Welcome to POLYMiX The Market Leader of Pre-mixed

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Fine Mortar Base Premium

back

Fine Mortar Base Premium

High Polymer Modified Cement-Based Thin Base Coat

Product Group:

Skim Coat & Render System

POLYMiX Fine Mortar Base Premium is a high quality high polymer modified water-resistant cement-based thin base coat specially formulated for direct spray application onto porous concrete, concrete panel and plastered surfaces for patching and surface levelling works. It is highly recommend for all internal and external applications. Please refer to the complete method statement for manual and spray application in our “POLYMiX-spray machine Fine Plaster & Spray Machines” brochure.
Appearance: Grey and Colour
Adhesion to concrete (28 days): Approx. 0.65 N/mm² (lab condition)
Pot life: 1 hour
Coverage: Approx. 1.3 kg/m²/2mm
Recommended Thickness: 2-4mm / build-up / application
Minimum application: 3 coats for external at criss-crossed directio
Binder: Portland Cement
Filler: Calcium Carbonate Powder / graded silica
Additives: Water soluble polymers
Properties: Improve consistency, workability, water retention & adhesion
Remove all loose materials or traces of foreign materials and ensure surface cleaned, free of dust and dirt. It is recommended to damp the substrate surface prior to the application of POLYMiX Fine Mortar Base Premium.
Mix thoroughly a bag of 25kg POLYMiX Fine Mortar Base Premium with 7.0 – 8.0 litres of clean water by using an electrical power mixer for 3 to 5 minutes until the homogeneous paste is achieved. Re-mix the material before re-use if the material is left undisturbed for more than 30 minutes.
Apply freshly mixed POLYMiX Fine Mortar Base Premium with steel trowel or spray machine to profile the substrate surface to an average thickness of 2 to 4mm. If application requires more than a single coat, continue to trowel POLYMiX Fine Mortar Base Premium and to allow the underlying coat to gain partial curing before applying the subsequent coat to achieve the desired flatness. POLYMiX Plaster Finish can be then applied onto POLYMiX Fine Mortar Base Premium if extra smooth finishing is required.
Packing: 25kg / bag
Shelf life: 6 months
Storage: Keep in cool dry condition
  • Precautions!
  • Clean tools with water before the product dries.
  • Do not apply to extremely absorbent substrate without prior pre-wetting. In hot conditions, protect the surface from drying out rapidly by lightly misting the prevent powderiness.
  • Do not mix the product with OPC / white cement / lime.
  • Recommended not to exceed the minimum recommended thickness of 2mm.
  • It is a good practice not to exceed the recommended thickness / build-up and to use in high humidity or raining condition to avoid excessive subsequent build-up.
  • Do not apply when there is vigorous hacking activities in the vicinity of the application area.